"Do we have to rip the tiles up first?" We hear this question at our Gepps Cross showroom almost every week. A lot of Adelaide homes built in the 1980s, 90s and 2000s have tiled living areas, and pulling those tiles up is noisy, dusty and expensive. The good news is that in most dry rooms you can lay new flooring straight over the top of existing tiles, as long as the tiles are flat, solid and well stuck down. This guide explains when it works, when it doesn't, and which flooring suits which room.
Last updated November 2026.
The short answer
- Hybrid and laminate (floating floors): usually yes, over flat, sound tiles in living areas, kitchens, hallways and bedrooms.
- Carpet: yes. Carpet, underlay and gripper strips go over tiles without any trouble in bedrooms and lounges.
- Vinyl plank: yes, but glue-down (direct stick) vinyl needs the grout lines filled and the surface smoothed first, or the tile pattern can show through over time.
- Bathrooms, toilets and laundries: this is vinyl territory. We don't recommend hybrid, laminate or timber in wet areas, whether they go over tiles or not.
Why lay over tiles instead of removing them?
- Less cost. Tile removal, disposal and grinding back the slab adds a real chunk to the job.
- Less mess and noise. Jackhammering tiles fills the whole house with dust. Laying over the top avoids most of that.
- Faster. No demolition day means your new floor can often go down in a day or two.
- Less risk in older homes. Some older adhesives and floor coverings can contain hazardous materials. Leaving sound tiles where they are means nothing is disturbed. If you're unsure what's under your floor, get it checked before anyone starts breaking things up.
The 4 checks before laying over tiles
1. Is the floor flat?
This is the big one. Click-together floors don't like dips, humps or tiles that sit higher than their neighbours (installers call this "lippage"). Uneven spots make the boards flex, which puts stress on the joins and can cause clicking, bounce or joints opening up over time. Most hybrid and laminate makers specify a maximum variation measured with a long straightedge, often around 3 mm over 2 m, but every product is different, so always go by the installation guide for the floor you choose. High spots can be ground down and low spots filled with a levelling compound.
2. Are any tiles drummy or cracked?
Tap the tiles with a coin or the handle of a screwdriver. A hollow, "drummy" sound means the tile has come away from the slab. Loose tiles can move and crack under a new floor, so they need to be fixed or removed and the gap filled before anything goes on top.
3. How deep are the grout lines?
Narrow, shallow grout lines are fine under a floating floor with underlay. Wide or deep grout lines need filling, especially under glue-down vinyl. Vinyl is thin and flexible, so it follows whatever is under it, and unfilled grout lines can "telegraph" through as a faint grid pattern.
4. Will the extra height cause problems?
New flooring adds height. A hybrid board plus underlay is typically somewhere around 7 to 10 mm, laminate a little more. Think about:
- Internal doors (they may need trimming at the bottom)
- Sliding doors and their tracks
- Where the new floor meets carpet or another floor (a transition trim covers the step)
- Appliances that slide into tight spaces, such as dishwashers and fridges
- The first step of a staircase, which shouldn't end up noticeably shorter than the rest
None of these are deal-breakers. They just need to be measured and planned, which is exactly what we do on a free measure and quote.
Which flooring works over tiles, room by room
| Room | Good choice over tiles | Notes |
|---|---|---|
| Living and dining | Hybrid, laminate, engineered timber | Check flatness and leave expansion gaps at walls and doorways |
| Bedrooms | Carpet, hybrid, laminate | Carpet over tiles is warmer and quieter underfoot |
| Hallways | Hybrid, laminate | Watch the height where the hallway meets other rooms |
| Kitchen | Hybrid, laminate, engineered timber or vinyl plank | Check dishwasher and fridge clearance. Wipe up spills promptly |
| Laundry | Vinyl plank | Not hybrid or laminate |
| Bathroom | Keep the tiles, or vinyl plank | Bathrooms have waterproofing requirements. Talk to us first |
Why we say no to hybrid over bathroom and laundry tiles
Hybrid boards have a waterproof core, so it's tempting to think they'll be fine anywhere. The problem is that hybrid is a floating floor. It clicks together and sits on top of an underlay, with gaps around the edges so it can expand and contract. In a bathroom, toilet or laundry, water from a shower, an overflowing basin or a washing machine hose can run through the joins and edges and sit underneath, where you can't see it or dry it out. That's why we recommend vinyl for bathrooms, toilets and laundries. Kitchens are different: hybrid, laminate and timber all work there, as long as spills are wiped up promptly. If you want the same look right through the house, we can usually match a hybrid colour in the living areas with a similar vinyl in the wet areas.
What about tiles on a timber floor?
Most tiled floors in Adelaide sit on a concrete slab, but some older homes have tiles laid over timber floors on fibre-cement sheeting. These can flex more than a slab, so it's even more important to check for cracked or loose tiles and any bounce before laying over them. If in doubt, we'll take a look on site.
Common questions
Can you put hybrid flooring over tiles?
Yes, in living areas, kitchens, hallways and bedrooms, as long as the tiles are flat, solid and not drummy. Use the underlay the manufacturer recommends and leave the expansion gaps it specifies.
Do I need underlay over tiles?
For hybrid and laminate, yes. Many hybrid boards come with underlay already attached, while laminate usually needs a separate one. Underlay helps with sound, comfort and small surface imperfections. It doesn't fix a floor that's genuinely uneven, though.
Can vinyl planks go straight over tiles?
Click vinyl can go over flat tiles with the right preparation. Glue-down vinyl needs the grout lines filled and the surface smoothed first, otherwise the grout pattern can show through.
Can you lay carpet over tiles?
Yes. Gripper strips are fixed around the edge of the room, underlay goes down, and the carpet is stretched over the top. It's a quick way to make a cold tiled bedroom feel cosy.
Is it cheaper to lay over tiles than remove them?
Usually, yes, because you skip demolition, disposal and slab grinding. The one cost to allow for is floor levelling if the tiles aren't flat enough. See our Adelaide flooring cost guide for typical prices.
How do I know if my tiles are flat enough?
Lay a long, straight piece of timber or an aluminium straightedge across the floor in several directions and look for gaps underneath. If you can slide a few coins under it, the floor probably needs some levelling. The easiest option is to book a free measure, and we'll check it for you.
Thinking about covering your tiles?
Every floor is different, and the right answer depends on your tiles, your rooms and the product you love. Our team will check the flatness, the height at your doors and the right floor for each room, then give you a clear quote. Book a free measure and quote, call us on 08 8272 6888, or visit our showroom at Home HQ, T15/750 Main North Road, Gepps Cross.
Want to compare your options first? Read our guides to hybrid vs laminate vs vinyl and the best flooring for every room.