Real timber floors never really go out of style. Once you've decided on timber, though, there's one more choice to make: engineered or solid? Both are real wood you can see and feel, but they're built differently, installed differently and behave differently in Adelaide's hot, dry summers and cool, damp winters. This guide explains the difference in plain English so you can choose the right one for your home.
Last updated November 2026.
The short answer
- Engineered timber is a real hardwood top layer bonded to a stable core. It moves less with temperature and humidity, comes pre-finished, often in wider boards, and suits concrete slabs, so it's the popular choice for most modern Adelaide homes.
- Solid timber is a single piece of hardwood all the way through. It can be sanded and refinished many times over its life, and it's the classic choice for older homes with timber floors on joists.
What's the difference?
Engineered timber
Engineered boards have a top layer (the "wear layer" or veneer) of real hardwood, often European oak, typically a few millimetres thick. It's bonded to a core of plywood or cross-laid timber. Because the layers run in different directions, the board resists the shrinking, swelling and cupping that solid timber can suffer as the seasons change. Most engineered floors arrive pre-finished, so there's no on-site sanding and coating once they're laid.
Solid timber
Solid timber boards are milled from a single piece of hardwood. In Australia that's often a local species such as Spotted Gum, Blackbutt, Jarrah or Tasmanian Oak. Traditional solid strip flooring is nailed to joists or battens, and many solid floors are sanded and coated on site after they're laid, which gives a seamless finish but adds time to the job.
Side-by-side comparison
| Engineered timber | Solid timber | |
|---|---|---|
| Construction | Hardwood top layer on a stable core | Hardwood all the way through |
| Stability | Very stable, less seasonal movement | Moves more with humidity and temperature |
| Board widths | Wide planks, herringbone and chevron are common | Usually narrower boards |
| Installation | Floating or glued over slabs, quicker | Nailed to joists or battens, or glued; often sanded and coated on site |
| Sanding later | Depends on wear layer thickness | Can be sanded many times |
| Best for | Concrete slabs, open-plan living and kitchens, modern homes | Older homes on joists, heritage renovations |
| Wet areas | Not suitable | Not suitable |
Why the Adelaide climate matters
Timber is a natural material. It takes on moisture when the air is damp and gives it up when the air is dry. Adelaide swings from hot, dry northerly days in summer to cooler, damper winters, and homes with big north- or west-facing windows can get very warm near the glass. Solid boards respond to that by shrinking (gaps between boards in summer) and swelling (tight joints, sometimes cupping, in winter). Some movement is normal and part of timber's character. Engineered boards are built to resist it, which is a big reason they're so popular in modern open-plan homes with lots of glass.
Slab or joists? This often decides it
- Concrete slab (most newer Adelaide homes): engineered timber is usually the simpler choice. It can float on an underlay or be glued down, with no battens needed.
- Timber floor on joists (many older villas and cottages): solid timber is the traditional fit, and engineered boards can work too with the right preparation.
Can you sand and polish them?
This is one of the biggest long-term differences.
- Solid timber can be sanded back and re-coated many times over its life. A worn, scratched floor from the 1970s can often look close to new again.
- Engineered timber can only be sanded as many times as its wear layer allows. A thicker wear layer may handle a full sand or two, while a thin one may only suit a light buff and re-coat. Always check the specification before you buy if refinishing later matters to you.
Already have timber floors under old carpet or looking tired? We also sand and polish timber floors. Ask us for a quote and we'll tell you honestly whether sanding or new flooring is the better option.
Which looks better?
Both are real wood, so once they're down most people can't tell the difference by looking. The style differences come from the species and format. Engineered timber is where you'll find wide European oak planks, smoked and lime-washed tones, and herringbone and chevron patterns. Solid Australian hardwoods give you those warm, rich local colours with plenty of natural variation. For more on colours, see our timber floor colour trends guide.
Common questions
Is engineered timber real wood?
Yes. The surface you walk on is a layer of real hardwood. Only the core underneath is a different construction, which is what makes it more stable.
Which is more durable, engineered or solid timber?
Day to day they wear about the same, because the surface is real hardwood in both cases and the coating does most of the protecting. Over decades, solid timber has the edge because it can be sanded more times.
Is engineered timber cheaper than solid timber?
It depends on the product. Engineered floors usually cost less to install because they're pre-finished and quicker to lay, but premium engineered oak can cost as much as solid timber. See our Adelaide flooring cost guide, or ask us for a quote on the floor you like.
Can timber flooring go in a kitchen?
Yes. Timber looks beautiful running from an open-plan living area into the kitchen. It's real wood, so wipe up spills promptly and use mats at the sink. What we don't recommend is timber in bathrooms, toilets or laundries. For those wet areas choose vinyl plank, and we can usually find one in a similar colour so the look flows through your home.
Can engineered timber go over tiles?
Often, yes, if the tiles are flat and solid. Read our guide on laying new flooring over tiles.
See timber floors in person
Photos only tell part of the story. Come and see our timber flooring range at our showroom at Home HQ, T15/750 Main North Road, Gepps Cross, take a look at a recent engineered timber project, or book a free measure and quote. Call us on 08 8272 6888.